首页 > 基础资料博客日记

zookeeper源码(07)leader、follower和observer

2024-01-30 13:10:17基础资料围观226次

这篇文章介绍了zookeeper源码(07)leader、follower和observer，分享给大家做个参考，收藏Java资料网收获更多编程知识

Leader

构造方法

public Leader(QuorumPeer self, LeaderZooKeeperServer zk) throws IOException {
    this.self = self;
    this.proposalStats = new BufferStats();

    // 获取节点间通信地址
    Set<InetSocketAddress> addresses;
    if (self.getQuorumListenOnAllIPs()) {
        addresses = self.getQuorumAddress().getWildcardAddresses();
    } else {
        addresses = self.getQuorumAddress().getAllAddresses();
    }

    // 创建ServerSocket并bind地址，add到serverSockets集，启动LearnerCnxAcceptor时使用
    addresses.stream()
      .map(address -> createServerSocket(address, self.shouldUsePortUnification(), self.isSslQuorum()))
      .filter(Optional::isPresent)
      .map(Optional::get)
      .forEach(serverSockets::add);

    this.zk = zk;
}

lead方法

QuorumPeer使用lead方法启动leader节点，从lead方法入手分析leader流程并分析重要的方法：

void lead() throws IOException, InterruptedException {
    self.end_fle = Time.currentElapsedTime();
    long electionTimeTaken = self.end_fle - self.start_fle;
    self.setElectionTimeTaken(electionTimeTaken);
    ServerMetrics.getMetrics().ELECTION_TIME.add(electionTimeTaken);
    self.start_fle = 0;
    self.end_fle = 0;

    zk.registerJMX(new LeaderBean(this, zk), self.jmxLocalPeerBean);

    try {
        self.setZabState(QuorumPeer.ZabState.DISCOVERY);
        self.tick.set(0);
        // 使用ZooKeeperServer的loadData方法加载db数据
        // 加载数据、清理session、生成快照(takeSnapshot)
        zk.loadData();

        leaderStateSummary = new StateSummary(self.getCurrentEpoch(), zk.getLastProcessedZxid());

        // 启动线程接收Learner连接，创建LearnerHandler与客户端通信
        cnxAcceptor = new LearnerCnxAcceptor();
        cnxAcceptor.start();

        // 获取上一次同步最终epoch并计算本次的epoch和zxid
        long epoch = getEpochToPropose(self.getMyId(), self.getAcceptedEpoch());
        // 设置新的zxid
        zk.setZxid(ZxidUtils.makeZxid(epoch, 0));

        synchronized (this) {
            lastProposed = zk.getZxid();
        }

        newLeaderProposal.packet = new QuorumPacket(NEWLEADER, zk.getZxid(), null, null);

        QuorumVerifier lastSeenQV = self.getLastSeenQuorumVerifier();
        QuorumVerifier curQV = self.getQuorumVerifier();
        if (curQV.getVersion() == 0 && curQV.getVersion() == lastSeenQV.getVersion()) {
            // qv.version == 0
            try {
                QuorumVerifier newQV = self.configFromString(curQV.toString());
                newQV.setVersion(zk.getZxid());
                self.setLastSeenQuorumVerifier(newQV, true);
            } catch (Exception e) {
                throw new IOException(e);
            }
        }

        newLeaderProposal.addQuorumVerifier(self.getQuorumVerifier());
        if (self.getLastSeenQuorumVerifier().getVersion() > self.getQuorumVerifier().getVersion()) {
            newLeaderProposal.addQuorumVerifier(self.getLastSeenQuorumVerifier());
        }

        // 等待足够数量的ACKEPOCH数据包，表示follower确认newEpoch
        // follower会把lastLoggedZxid、currentEpoch发送过来，leader用这些参数判断同步数据的方式
        waitForEpochAck(self.getMyId(), leaderStateSummary);
        self.setCurrentEpoch(epoch); // 设置新的currentEpoch
        self.setLeaderAddressAndId(self.getQuorumAddress(), self.getMyId());
        self.setZabState(QuorumPeer.ZabState.SYNCHRONIZATION);

        try {
            // 等待follower的newLeaderAck
            waitForNewLeaderAck(self.getMyId(), zk.getZxid());
        } catch (InterruptedException e) {
            // 略
            return;
        }
        // 启动zookeeperServer
        startZkServer();

        self.setZabState(QuorumPeer.ZabState.BROADCAST);
        self.adminServer.setZooKeeperServer(zk);

        // We ping twice a tick, so we only update the tick every other iteration
        boolean tickSkip = true;
        String shutdownMessage = null;

        while (true) {
            synchronized (this) {
                long start = Time.currentElapsedTime();
                long cur = start;
                long end = start + self.tickTime / 2;
                // 等待tickTime / 2毫秒
                while (cur < end) {
                    wait(end - cur);
                    cur = Time.currentElapsedTime();
                }

                if (!tickSkip) {
                    self.tick.incrementAndGet();
                }

                // 用来判断learner同步状态
                SyncedLearnerTracker syncedAckSet = new SyncedLearnerTracker();
                syncedAckSet.addQuorumVerifier(self.getQuorumVerifier());
                if (self.getLastSeenQuorumVerifier() != null &&
                    self.getLastSeenQuorumVerifier().getVersion() > self.getQuorumVerifier().getVersion()) {
                    syncedAckSet.addQuorumVerifier(self.getLastSeenQuorumVerifier());
                }

                syncedAckSet.addAck(self.getMyId());

                // 查询learner的ack状态
                for (LearnerHandler f : getLearners()) {
                    if (f.synced()) {
                        syncedAckSet.addAck(f.getSid());
                    }
                }

                if (!this.isRunning()) { // shutdown
                    break;
                }

                // 判断超半数learner已是同步状态
                // 1个tickTime周期判断一次
                if (!tickSkip && !syncedAckSet.hasAllQuorums() &&
                    !(self.getQuorumVerifier().overrideQuorumDecision(getForwardingFollowers()) &&
                      self.getQuorumVerifier().revalidateOutstandingProp(
                          this, new ArrayList<>(outstandingProposals.values()), lastCommitted))) {
                    // Lost quorum of last committed and/or last proposed
                    shutdownMessage = "Not sufficient followers synced";
                    break;
                }
                tickSkip = !tickSkip;
            }
            // ping learner
            // 1个tickTime周期ping两次
            for (LearnerHandler f : getLearners()) {
                f.ping();
            }
        }
        if (shutdownMessage != null) {
            // leader goes in looking state
            shutdown(shutdownMessage);
        }
    } finally {
        zk.unregisterJMX(this);
    }
}

getEpochToPropose方法

获取上一次同步的最终epoch并计算zxid的值：

public long getEpochToPropose(long sid, long lastAcceptedEpoch) throws InterruptedException, IOException {
    synchronized (connectingFollowers) {
        if (!waitingForNewEpoch) {
            return epoch;
        }
        if (lastAcceptedEpoch >= epoch) {
            epoch = lastAcceptedEpoch + 1; // 更新最新epoch
        }
        if (isParticipant(sid)) {
            connectingFollowers.add(sid);
        }
        QuorumVerifier verifier = self.getQuorumVerifier();
        // 连接的follower超过了半数
        if (connectingFollowers.contains(self.getMyId()) && verifier.containsQuorum(connectingFollowers)) {
            waitingForNewEpoch = false;
            self.setAcceptedEpoch(epoch); // 设置新的epoch
            connectingFollowers.notifyAll();
        } else {
            long start = Time.currentElapsedTime();
            if (sid == self.getMyId()) {
                timeStartWaitForEpoch = start;
            }
            long cur = start;
            long end = start + self.getInitLimit() * self.getTickTime();
            // 等待initLimit*tickTime毫秒，如果还是waitingForNewEpoch状态抛错，会触发重新选举
            while (waitingForNewEpoch && cur < end && !quitWaitForEpoch) {
                connectingFollowers.wait(end - cur);
                cur = Time.currentElapsedTime();
            }
            if (waitingForNewEpoch) {
                throw new InterruptedException("Timeout while waiting for epoch from quorum");
            }
        }
        return epoch;
    }
}

waitForEpochAck方法

等待足够数量的ACKEPOCH数据包，表示follower确认newEpoch，follower会把lastLoggedZxid、currentEpoch发送过来，leader用这些参数判断同步数据的方式：

public void waitForEpochAck(long id, StateSummary ss) throws IOException, InterruptedException {
    synchronized (electingFollowers) {
        if (electionFinished) {
            return;
        }
        // 略
        QuorumVerifier verifier = self.getQuorumVerifier();
        if (electingFollowers.contains(self.getMyId()) && verifier.containsQuorum(electingFollowers)) {
            electionFinished = true;
            electingFollowers.notifyAll();
        } else {
            long start = Time.currentElapsedTime();
            long cur = start;
            long end = start + self.getInitLimit() * self.getTickTime();
            while (!electionFinished && cur < end) {
                electingFollowers.wait(end - cur);
                cur = Time.currentElapsedTime();
            }
            if (!electionFinished) {
                throw new InterruptedException("Timeout while waiting for epoch to be acked by quorum");
            }
        }
    }
}

waitForNewLeaderAck方法

等待足够数量的Leader.ACK请求上来，之后才能开始正常通信：

public void waitForNewLeaderAck(long sid, long zxid) throws InterruptedException {

    synchronized (newLeaderProposal.qvAcksetPairs) {

        if (quorumFormed) {
            return;
        }

        long currentZxid = newLeaderProposal.packet.getZxid();
        if (zxid != currentZxid) {
            LOG.error("NEWLEADER ACK from sid: {} is from a different epoch - current 0x{} received 0x{}",
                      sid, Long.toHexString(currentZxid), Long.toHexString(zxid));
            return;
        }

        // Note that addAck already checks that the learner is a PARTICIPANT.
        newLeaderProposal.addAck(sid);

        if (newLeaderProposal.hasAllQuorums()) {
            quorumFormed = true;
            newLeaderProposal.qvAcksetPairs.notifyAll();
        } else {
            long start = Time.currentElapsedTime();
            long cur = start;
            long end = start + self.getInitLimit() * self.getTickTime();
            while (!quorumFormed && cur < end) {
                newLeaderProposal.qvAcksetPairs.wait(end - cur);
                cur = Time.currentElapsedTime();
            }
            if (!quorumFormed) {
                throw new InterruptedException("Timeout while waiting for NEWLEADER to be acked by quorum");
            }
        }
    }
}

LearnerCnxAcceptor类

启动LearnerCnxAcceptor线程：

// Start thread that waits for connection requests from new followers.
cnxAcceptor = new LearnerCnxAcceptor();
cnxAcceptor.start();

LearnerCnxAcceptor类：

public void run() {
    if (!stop.get() && !serverSockets.isEmpty()) {
        ExecutorService executor = Executors.newFixedThreadPool(serverSockets.size());
        CountDownLatch latch = new CountDownLatch(serverSockets.size());

        // 启动LearnerCnxAcceptorHandler
        serverSockets.forEach(serverSocket ->
                executor.submit(new LearnerCnxAcceptorHandler(serverSocket, latch)));

        try {
            latch.await();
        } catch (InterruptedException ie) {
        } finally {
            // 关闭连接、线程池
        }
    }
}

LearnerCnxAcceptorHandler类启动监听，接受连接：

class LearnerCnxAcceptorHandler implements Runnable {
    private ServerSocket serverSocket;
    private CountDownLatch latch;

    LearnerCnxAcceptorHandler(ServerSocket serverSocket, CountDownLatch latch) {
        this.serverSocket = serverSocket;
        this.latch = latch;
    }

    @Override
    public void run() {
        try {
            while (!stop.get()) {
                acceptConnections(); // 接受连接
            }
        } catch (Exception e) {
            // 关闭
        } finally {
            latch.countDown(); // countdown到0会唤醒LearnerCnxAcceptor
        }
    }

    private void acceptConnections() throws IOException {
        Socket socket = null;
        boolean error = false;
        try {
            socket = serverSocket.accept(); // 接受客户端连接
            socket.setSoTimeout(self.tickTime * self.initLimit); // timeout
            socket.setTcpNoDelay(nodelay);

            BufferedInputStream is = new BufferedInputStream(socket.getInputStream());
            // 封装LearnerHandler对象，与客户端通信
            LearnerHandler fh = new LearnerHandler(socket, is, Leader.this);
            fh.start();
        } catch (Exception e) {
            // 略
        } finally {
            // 略
        }
    }
}

LearnerHandler

与客户端通信。

关键字段

protected final Socket sock; // 客户端socket
// Leader对象
final LearnerMaster learnerMaster;
// 给learner的唯一标识
protected long sid = 0;
// 发送队列
final LinkedBlockingQueue<QuorumPacket> queuedPackets = new LinkedBlockingQueue<>();
// zxid
protected volatile long lastZxid = -1;
// 输出输入流
private BinaryInputArchive ia;
private BinaryOutputArchive oa;
private final BufferedInputStream bufferedInput;
private BufferedOutputStream bufferedOutput;
// learner类型 PARTICIPANT/OBSERVER
private LearnerType learnerType = LearnerType.PARTICIPANT;

run方法

接收Leader.FOLLOWERINFO或Leader.OBSERVERINFO数据包，解析type、sid等关键字段，计算newEpoch和newLeaderZxid
发送Leader.LEADERINFO数据包，包含newLeaderZxid值
读取Leader.ACKEPOCH数据包，解析对端的epoch、zxid

根据对端zxid判断是否需要同步数据、如何同步数据(txnlog/committedlog/snapshot)

peerLastZxid = ss.getLastZxid(); // 对端最新processZxid

// 同步txnlog或committedlog数据，或者返回true使用SNAP方式同步快照数据
boolean needSnap = syncFollower(peerLastZxid, learnerMaster);

// 比对maxCommittedLog、minCommittedLog与peerLastZxid同步txnlog和committedlog数据或者使用SNAP同步数据
// committedlog在内存里面，性能更好

同步txnlog和committedlog数据

if ((maxCommittedLog >= peerLastZxid) && (minCommittedLog <= peerLastZxid)) {
    // 对端lastZxid在minCommittedLog和maxCommittedLog之间
    // 直接使用committedlog同步
    Iterator<Proposal> itr = db.getCommittedLog().iterator();
    currentZxid = queueCommittedProposals(itr, peerLastZxid, null, maxCommittedLog);
    needSnap = false;
} else if (peerLastZxid < minCommittedLog && txnLogSyncEnabled) {
    // 使用txnlog和committedLog同步

    // 默认"最新snapshot文件字节数 * 0.33"
    long sizeLimit = db.calculateTxnLogSizeLimit();
    // 从txnlog查找数据，当数据字节数大于sizeLimit将返回空集，强制使用SNAP同步
    Iterator<Proposal> txnLogItr = db.getProposalsFromTxnLog(peerLastZxid, sizeLimit);
    if (txnLogItr.hasNext()) {
        // 使用txnlog同步
        currentZxid = queueCommittedProposals(txnLogItr, peerLastZxid, minCommittedLog, maxCommittedLog);

        // txnlog同步未达到minCommittedLog表示txnlog和committedLog数据存在缺失
        // 将强制使用SNAP同步
        if (currentZxid < minCommittedLog) {
            currentZxid = peerLastZxid;
            // Clear out currently queued requests and revert to sending a snapshot
            queuedPackets.clear();
            needOpPacket = true;
        } else {
            // 使用committedlog同步
            Iterator<Proposal> committedLogItr = db.getCommittedLog().iterator();
            currentZxid = queueCommittedProposals(committedLogItr, currentZxid, null, maxCommittedLog);
            needSnap = false;
        }
    }
    // 略
}

启动转发功能

// Start forwarding
leaderLastZxid = learnerMaster.startForwarding(this, currentZxid);

// 把toBeApplied数据(待commit状态)发出去
// 添加到forwardingFollowers/observingLearners集

如果needSnap为true则需要发送SNAP请求让learner读取输入流加载dataTree

long zxidToSend = learnerMaster.getZKDatabase().getDataTreeLastProcessedZxid();
// 发送SNAP请求
oa.writeRecord(new QuorumPacket(Leader.SNAP, zxidToSend, null, null), "packet");
messageTracker.trackSent(Leader.SNAP);
bufferedOutput.flush();

// 将dataTree序列化发给learner
learnerMaster.getZKDatabase().serializeSnapshot(oa);
oa.writeString("BenWasHere", "signature");
bufferedOutput.flush();

发送NEWLEADER请求

if (getVersion() < 0x10000) {
    QuorumPacket newLeaderQP = new QuorumPacket(Leader.NEWLEADER, newLeaderZxid, null, null);
    oa.writeRecord(newLeaderQP, "packet");
} else {
    QuorumPacket newLeaderQP = new QuorumPacket(
        Leader.NEWLEADER, newLeaderZxid, learnerMaster.getQuorumVerifierBytes(), null);
    queuedPackets.add(newLeaderQP);
}

启动sendPackets线程：从queuedPackets取消息发给learner节点
等待NEWLEADER ACK响应

qp = new QuorumPacket();
ia.readRecord(qp, "packet");

messageTracker.trackReceived(qp.getType());
if (qp.getType() != Leader.ACK) {
    return;
}

learnerMaster.waitForNewLeaderAck(getSid(), qp.getZxid());

等待zookeeperServer启动完成
发送UPTODATE请求，告知follower处于最新状态，并且可以开始响应客户端
```
queuedPackets.add(new QuorumPacket(Leader.UPTODATE, -1, null, null));
```
启动while循环与客户端保持通信，处理ACK、PING、REVALIDATE、REQUEST等请求

Follower

包含了follower的逻辑。

followLeader方法

the main method called by the follower to follow the leader.

void followLeader() throws InterruptedException {
    self.end_fle = Time.currentElapsedTime();
    long electionTimeTaken = self.end_fle - self.start_fle;
    self.setElectionTimeTaken(electionTimeTaken);
    ServerMetrics.getMetrics().ELECTION_TIME.add(electionTimeTaken);
    self.start_fle = 0;
    self.end_fle = 0;
    fzk.registerJMX(new FollowerBean(this, zk), self.jmxLocalPeerBean);

    long connectionTime = 0;
    boolean completedSync = false;

    try {
        self.setZabState(QuorumPeer.ZabState.DISCOVERY);
        // 查找leader服务器
        QuorumServer leaderServer = findLeader();
        try {
            // 连接leader服务器
            connectToLeader(leaderServer.addr, leaderServer.hostname);
            connectionTime = System.currentTimeMillis();
            // 获取事务id
            long newEpochZxid = registerWithLeader(Leader.FOLLOWERINFO);
            if (self.isReconfigStateChange()) {
                throw new Exception("learned about role change");
            }
            // zxid >> 32L得到epoch
            long newEpoch = ZxidUtils.getEpochFromZxid(newEpochZxid);
            if (newEpoch < self.getAcceptedEpoch()) {
                throw new IOException("Error: Epoch of leader is lower");
            }
            long startTime = Time.currentElapsedTime();
            self.setLeaderAddressAndId(leaderServer.addr, leaderServer.getId());
            self.setZabState(QuorumPeer.ZabState.SYNCHRONIZATION);
            // 与leader同步数据
            syncWithLeader(newEpochZxid);
            self.setZabState(QuorumPeer.ZabState.BROADCAST);
            completedSync = true;
            long syncTime = Time.currentElapsedTime() - startTime;
            ServerMetrics.getMetrics().FOLLOWER_SYNC_TIME.add(syncTime);
            if (self.getObserverMasterPort() > 0) {
                // 创建ObserverMaster用来链式复制，此处不做分析
                om = new ObserverMaster(self, fzk, self.getObserverMasterPort());
                om.start();
            } else {
                om = null;
            }
            // 保持通信
            QuorumPacket qp = new QuorumPacket();
            while (this.isRunning()) {
                readPacket(qp);
                processPacket(qp); // 处理leader的数据包
            }
        } catch (Exception e) {
            // ...
        }
    } finally {
        // ...
    }
}

connectToLeader方法

protected void connectToLeader(MultipleAddresses multiAddr, String hostname) throws IOException {
    this.leaderAddr = multiAddr;
    Set<InetSocketAddress> addresses;
    if (self.isMultiAddressReachabilityCheckEnabled()) {
        addresses = multiAddr.getAllReachableAddressesOrAll();
    } else {
        addresses = multiAddr.getAllAddresses();
    }
    ExecutorService executor = Executors.newFixedThreadPool(addresses.size());
    CountDownLatch latch = new CountDownLatch(addresses.size());
    AtomicReference<Socket> socket = new AtomicReference<>(null);
    // 使用LeaderConnector异步建立连接，此处考虑到了多地址的情况
    addresses.stream()
        .map(address -> new LeaderConnector(address, socket, latch)).forEach(executor::submit);

    try {
        latch.await();
    } catch (InterruptedException e) {
    } finally {
        // 关闭executor
    }

    if (socket.get() == null) {
        throw new IOException("Failed connect to " + multiAddr);
    } else {
        sock = socket.get();
        sockBeingClosed.set(false);
    }
    // 认证 略
    self.authLearner.authenticate(sock, hostname);

    // 获取输入输出流
    leaderIs = BinaryInputArchive.getArchive(new BufferedInputStream(sock.getInputStream()));
    bufferedOutput = new BufferedOutputStream(sock.getOutputStream());
    leaderOs = BinaryOutputArchive.getArchive(bufferedOutput);
    // 启动发送线程，基于BlockingQueue的生产者消费者模式
    if (asyncSending) {
        startSendingThread();
    }
}

registerWithLeader方法

protected long registerWithLeader(int pktType) throws IOException {
    // 1. 先发送一个Leader.FOLLOWERINFO类型数据包:
    // Leader.FOLLOWERINFO, zxid, sid, protocolVersion, quorumVersion
    long lastLoggedZxid = self.getLastLoggedZxid();
    QuorumPacket qp = new QuorumPacket();
    qp.setType(pktType);
    qp.setZxid(ZxidUtils.makeZxid(self.getAcceptedEpoch(), 0));

    LearnerInfo li = new LearnerInfo(self.getMyId(), 0x10000, self.getQuorumVerifier().getVersion());
    ByteArrayOutputStream bsid = new ByteArrayOutputStream();
    BinaryOutputArchive boa = BinaryOutputArchive.getArchive(bsid);
    boa.writeRecord(li, "LearnerInfo");
    qp.setData(bsid.toByteArray());

    writePacket(qp, true); // 把数据包写出去

    // 2. 读取leader的Leader.LEADERINFO数据包
    readPacket(qp);
    final long newEpoch = ZxidUtils.getEpochFromZxid(qp.getZxid()); // 解析newEpoch
    if (qp.getType() == Leader.LEADERINFO) { // 使用1.0版本协议
        leaderProtocolVersion = ByteBuffer.wrap(qp.getData()).getInt();
        byte[] epochBytes = new byte[4];
        final ByteBuffer wrappedEpochBytes = ByteBuffer.wrap(epochBytes);
        if (newEpoch > self.getAcceptedEpoch()) {
            wrappedEpochBytes.putInt((int) self.getCurrentEpoch());
            self.setAcceptedEpoch(newEpoch); // 设置acceptEpoch
        } else if (newEpoch == self.getAcceptedEpoch()) {
            wrappedEpochBytes.putInt(-1);
        } else {
            throw new IOException("...");
        }
        // 3. 发送ACKEPOCH类型数据包:
        // 包含self.lastLoggedZxid和self.currentEpoch
        QuorumPacket ackNewEpoch = new QuorumPacket(Leader.ACKEPOCH, lastLoggedZxid, epochBytes, null);
        writePacket(ackNewEpoch, true);
        return ZxidUtils.makeZxid(newEpoch, 0);
    } else {
        // 低版本分支，略
    }
}

syncWithLeader方法

读leader数据包

DIFF - 表示数据已经是最新，可以直接同步新数据

SNAP - 将leader输入流(leader的dataTree快照数据)反序列化到zkDb

zk.getZKDatabase().deserializeSnapshot(leaderIs);
zk.getZKDatabase().setlastProcessedZxid(qp.getZxid());

TRUNC - 将数据truncate到指定位置

boolean truncated = zk.getZKDatabase().truncateLog(qp.getZxid());
zk.getZKDatabase().setlastProcessedZxid(qp.getZxid());

继续读leader数据包，leader可能使用txnlog或committedlog同步数据
同步数据并提交：
- PROPOSAL - 提案数据会放入packetsNotCommitted集待处理
- COMMIT/COMMITANDACTIVATE - 提交数据会放入packetsCommitted集待处理
- INFORM/INFORMANDACTIVATE - 同上
- NEWLEADER - leader已经停止同步数据，follower会takeSnapshot、setCurrentEpoch、将packetsNotCommitted都提交给zk、响应ACK
```
// fzk.logRequest(p.hdr, p.rec, p.digest);

public void logRequest(TxnHeader hdr, Record txn, TxnDigest digest) {
    Request request = new Request(
        hdr.getClientId(), hdr.getCxid(), hdr.getType(), hdr, txn, hdr.getZxid());
    request.setTxnDigest(digest);
    if ((request.zxid & 0xffffffffL) != 0) {
        pendingTxns.add(request); // 待处理的事务集
    }
    syncProcessor.processRequest(request); // 持久化磁盘
}
```
- UPTODATE - leader会等待足够的follower响应ACK并且确定各种组件已启动之后，发送一个UPTODATE数据包，表示follower已经处于同步状态，停止同步，跳出循环

处理packetsNotCommitted和packetsCommitted集，处理事务或写磁盘

FollowerZooKeeperServer fzk = (FollowerZooKeeperServer) zk;
for (PacketInFlight p : packetsNotCommitted) {
    fzk.logRequest(p.hdr, p.rec, p.digest);
}
for (Long zxid : packetsCommitted) {
    fzk.commit(zxid);
}

// 使用RequestProcessor处理Request
// 后续再详细介绍

Observer会执行下面代码处理

ObserverZooKeeperServer ozk = (ObserverZooKeeperServer) zk;
for (PacketInFlight p : packetsNotCommitted) {
    Long zxid = packetsCommitted.peekFirst();
    if (p.hdr.getZxid() != zxid) {
        // log warning message if there is no matching commit
        // old leader send outstanding proposal to observer
        continue;
    }
    packetsCommitted.remove();
    Request request = new Request(
        p.hdr.getClientId(), p.hdr.getCxid(), p.hdr.getType(), p.hdr, p.rec, -1);
    request.setTxnDigest(p.digest);
    ozk.commitRequest(request);
}

processPacket方法

在连接建立、数据处于同步状态后，follower会阻塞读取来自leader的数据包，之后使用processPacket方法处理：

// create a reusable packet to reduce gc impact
QuorumPacket qp = new QuorumPacket();
while (this.isRunning()) {
    readPacket(qp);
    processPacket(qp);
}

processPacket方法：

protected void processPacket(QuorumPacket qp) throws Exception {
    switch (qp.getType()) {
    case Leader.PING:
        ping(qp);
        break;
    case Leader.PROPOSAL:
        ServerMetrics.getMetrics().LEARNER_PROPOSAL_RECEIVED_COUNT.add(1);
        TxnLogEntry logEntry = SerializeUtils.deserializeTxn(qp.getData());
        TxnHeader hdr = logEntry.getHeader();
        Record txn = logEntry.getTxn();
        TxnDigest digest = logEntry.getDigest();
        if (hdr.getZxid() != lastQueued + 1) {
            LOG.warn("Got zxid 0x{} expected 0x{}",
                     Long.toHexString(hdr.getZxid()), Long.toHexString(lastQueued + 1));
        }
        lastQueued = hdr.getZxid();

        if (hdr.getType() == OpCode.reconfig) {
            SetDataTxn setDataTxn = (SetDataTxn) txn;
            QuorumVerifier qv = self.configFromString(new String(setDataTxn.getData(), UTF_8));
            self.setLastSeenQuorumVerifier(qv, true);
        }

        // 封装Request使用syncProcessor.processRequest(request)写磁盘
        fzk.logRequest(hdr, txn, digest);
        // 略
        break;
    case Leader.COMMIT:
        ServerMetrics.getMetrics().LEARNER_COMMIT_RECEIVED_COUNT.add(1);
        // 使用commitProcessor.commit(request)提交请求
        fzk.commit(qp.getZxid());
        // 略
        break;
    case Leader.COMMITANDACTIVATE:
        // get the new configuration from the request
        Request request = fzk.pendingTxns.element();
        SetDataTxn setDataTxn = (SetDataTxn) request.getTxn();
        QuorumVerifier qv = self.configFromString(new String(setDataTxn.getData(), UTF_8));

        // get new designated leader from (current) leader's message
        ByteBuffer buffer = ByteBuffer.wrap(qp.getData());
        long suggestedLeaderId = buffer.getLong();
        final long zxid = qp.getZxid();
        boolean majorChange = self.processReconfig(qv, suggestedLeaderId, zxid, true);
        // commit (writes the new config to ZK tree (/zookeeper/config)
        fzk.commit(zxid);

        // 略
        break;
    case Leader.UPTODATE:
        // 正常情况下主从复制数据不应该出现这种类型数据包
        break;
    case Leader.REVALIDATE:
        if (om == null || !om.revalidateLearnerSession(qp)) {
            revalidate(qp);
        }
        break;
    case Leader.SYNC:
        fzk.sync();
        break;
    default:
        LOG.warn("Unknown packet type: {}", LearnerHandler.packetToString(qp));
        break;
    }
}

Observer

observeLeader方法

void observeLeader() throws Exception {
    zk.registerJMX(new ObserverBean(this, zk), self.jmxLocalPeerBean);
    long connectTime = 0;
    boolean completedSync = false;
    try {
        self.setZabState(QuorumPeer.ZabState.DISCOVERY);
        // 获取leader或一个observerMaster服务器
        QuorumServer master = findLearnerMaster();
        try {
            // 连接leader或observerMaster
            connectToLeader(master.addr, master.hostname);
            connectTime = System.currentTimeMillis();
            long newLeaderZxid = registerWithLeader(Leader.OBSERVERINFO);
            if (self.isReconfigStateChange()) {
                throw new Exception("learned about role change");
            }

            final long startTime = Time.currentElapsedTime();
            self.setLeaderAddressAndId(master.addr, master.getId());
            self.setZabState(QuorumPeer.ZabState.SYNCHRONIZATION);
            syncWithLeader(newLeaderZxid);
            self.setZabState(QuorumPeer.ZabState.BROADCAST);
            completedSync = true;
            final long syncTime = Time.currentElapsedTime() - startTime;
            ServerMetrics.getMetrics().OBSERVER_SYNC_TIME.add(syncTime);
            QuorumPacket qp = new QuorumPacket();
            while (this.isRunning() && nextLearnerMaster.get() == null) {
                readPacket(qp);
                processPacket(qp);
            }
        } catch (Exception e) {
            closeSocket();
            // clear pending revalidations
            pendingRevalidations.clear();
        }
    } finally {
        currentLearnerMaster = null;
        zk.unregisterJMX(this);
        if (connectTime != 0) {
            long connectionDuration = System.currentTimeMillis() - connectTime;
            messageTracker.dumpToLog(leaderAddr.toString());
        }
    }
}

processPacket方法

protected void processPacket(QuorumPacket qp) throws Exception {
    TxnLogEntry logEntry;
    TxnHeader hdr;
    TxnDigest digest;
    Record txn;
    switch (qp.getType()) {
    case Leader.PING:
        ping(qp);
        break;
    case Leader.PROPOSAL:
        LOG.warn("Ignoring proposal");
        break;
    case Leader.COMMIT:
        LOG.warn("Ignoring commit");
        break;
    case Leader.UPTODATE:
        LOG.error("Received an UPTODATE message after Observer started");
        break;
    case Leader.REVALIDATE:
        revalidate(qp);
        break;
    case Leader.SYNC:
        ((ObserverZooKeeperServer) zk).sync();
        break;
    case Leader.INFORM:
        ServerMetrics.getMetrics().LEARNER_COMMIT_RECEIVED_COUNT.add(1);
        logEntry = SerializeUtils.deserializeTxn(qp.getData());
        hdr = logEntry.getHeader();
        txn = logEntry.getTxn();
        digest = logEntry.getDigest();
        Request request = new Request(hdr.getClientId(), hdr.getCxid(), hdr.getType(), hdr, txn, 0);
        request.logLatency(ServerMetrics.getMetrics().COMMIT_PROPAGATION_LATENCY);
        request.setTxnDigest(digest);
        ObserverZooKeeperServer obs = (ObserverZooKeeperServer) zk;
        obs.commitRequest(request); // 提交
        break;
    case Leader.INFORMANDACTIVATE:
        // reconfig功能使用
        break;
    default:
        LOG.warn("Unknown packet type: {}", LearnerHandler.packetToString(qp));
        break;
    }
}

Leader与Follower通信总结

Leader                                                                           Follower
                     FOLLOWERINFO/OBSERVERINFO数据包发送acceptEpoch
         <-------------------------------------------------------------------
                             leader计算newEpoch、newZxid

                             LEADERINFO数据包发送最新的zxid
         ------------------------------------------------------------------->
                               follower接受newEpoch

                     ACKEPOCH数据包发送lastLoggedZxid、currentEpoch
         <------------------------------------------------------------------
                                leader确定数据同步方式

                           DIFF/TRUNC/SNAP或者同步数据(loop)
         ------------------------------------------------------------------->

                                    NEWLEADER数据包
         ------------------------------------------------------------------->

                                       ACK数据包
         <------------------------------------------------------------------

                                    UPTODATE数据包
         ------------------------------------------------------------------->


                                    PROPOSAL数据包
         ------------------------------------------------------------------->

                                       ACK数据包
         <------------------------------------------------------------------

                                     COMMIT数据包
         ------------------------------------------------------------------->

                                       ACK数据包
         <------------------------------------------------------------------

文章来源:https://www.cnblogs.com/xugf/p/17996887
本文来自互联网用户投稿，该文观点仅代表作者本人，不代表本站立场。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如若内容造成侵权/违法违规/事实不符，请联系邮箱：jacktools123@163.com进行投诉反馈，一经查实，立即删除！

标签：

上一篇：代码整洁之道（一）之优化if-else的8种方案
下一篇：JAVA之浮点数的比较

首页 > 基础资料博客日记

zookeeper源码(07)leader、follower和observer

Leader

构造方法

lead方法

getEpochToPropose方法

waitForEpochAck方法

waitForNewLeaderAck方法

LearnerCnxAcceptor类

LearnerHandler

关键字段

run方法

Follower

followLeader方法

connectToLeader方法

registerWithLeader方法

syncWithLeader方法

processPacket方法

Observer

observeLeader方法

processPacket方法

Leader与Follower通信总结

相关文章

最新发布

点击排行

本站推荐

标签云

首页 > 基础资料 博客日记

zookeeper源码(07)leader、follower和observer

Leader

构造方法

lead方法

getEpochToPropose方法

waitForEpochAck方法

waitForNewLeaderAck方法

LearnerCnxAcceptor类

LearnerHandler

关键字段

run方法

Follower

followLeader方法

connectToLeader方法

registerWithLeader方法

syncWithLeader方法

processPacket方法

Observer

observeLeader方法

processPacket方法

Leader与Follower通信总结

相关文章

最新发布

点击排行

本站推荐

标签云

首页 > 基础资料博客日记